|
THERMASGARD® MWTFTHERMASGARD® MWTF mean-value temperature transmitter with rod sensor (0.4...20 m) and passive output, in an impact resistant plastic housing with quick-locking screws as well as bendable sensor rod (fully active), protective tube made of plastic-coated copper, and anti-kink spring, incl. mounting flange. THERMASGARD® MWTF-SD mean-value temperature transmitter with rod sensor (3 m or 6 m) and passive output, in an impact resistant plastic housing with snap-on cover, with bendable sensor rod (fully active), protective tube (hose) made of reinforced thermoplastic and anti-kink spring, incl. mounting flange. The sensor device serves to detect the mean temperature (mean value) in gaseous media, e.g. in ventilation and air conditioning ducts over the entire cross section or over a defined length. Laid along a meandering route, it uniformly detects the surrounding temperature as a duct temperature sensor. MK-05-M mounting clamps (accessory) are available for proper mounting of the rod.
Collect
产品编号 1101-3050
Measuring range –30...+80 °C Process connection by mounting flange, plastic (galvanised steel optional, see accessories) and mounting clamps MK - 05 - M Sleeve stainless steel, 1.4571, V4A Sensor active over the entire length (averaging) Rod material copper sensor tube, plastic-coated, with spring for buckling protection Electrical connection 0.14 - 1.5 mm² via terminal screws on circuit board Cable connection cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or M12 connector according to DIN EN 61076-2-101 (optional on request) Housing dimensions 72 x 64 x 37,8 mm (Tyr 1) Cable gland M 16 x 1.5, including strain relief, exchangeable, max. inner diameter 10.4 mm Installation observe minimum bending radius of 35 mm and permissible vibration load, ½ G Permissible air humidity < 95 % RH, non-precipitating air Protection class III (according to EN 60 730) Protection type |
