|
THERMASGARD® RTM 1-UROOM TEMPERATURE MEASURING TRANSDUCER THERMASGARD® RTM 1 Calibratable THERMASGARD® RTM 1 room temperature measuring transducer with continuous output, with/without optional display for indicating the actual temperature, in an elegant housing made of plastic, with snap-on cover, base with 4-hole attachment, for mounting on vertically or horizontally installed in-wall flush boxes, with predetermined breaking point for on-wall cable entry. Alternatively, the device is also available with an housing made of stainless steel (top and bottom parts are stainless steel, the cover is screwed on) as a vandal-proof version e.g. for schools, barracks and public buildings. This room/residential temperature transmitter serves to detect/display the temperature in closed, dry rooms, in apartments, offices, supermarkets and business facilities.
Collect
产品编号 1101-41D1/1101-41A1
Power consumption < 1.0W 24V DC; < 2.2VA 24V AC Voltage supply 24 V AC/ DC (± 10 %) Load resistance RL > 5 kOhm Temperature deviation typically ± 0.2 K at +25 °C Output 0 - 10 V Connection type 2- or 3-wire connection Measuring ranges multi-range switching with 8 switchable measuring ranges, see table (other ranges optional) operating range –30...+70 °C with manual zero point correction (± 10 K) Ambient temperature Measuring transducer –30...+70 °C Process connection by screws Electrical connection 0.14 - 1.5 mm² via terminal screws Housing plastic, material ABS, colour pure white (similar to RAL 9010) Housing dimensions 85 x 85 x 27 mm (Baldur 1) Installation wall mounting or on in-wall flush box, Ø 55 mm, base with 4 holes, for attachment to vertically or horizontally installed in-wall flush boxes for rear cable entry, with predetermined breaking point for cable entry from top/ bottom in case of plain on-wall installation Permissible air humidity < 95 % RH, non-precipitating air Protection class III (according to EN 60 730) Protection type IP 30 (according to EN 60 529) Standards CE conformity, electromagnetic compatibility according to EN 61326, according to EMC Directive 2014/ 30/ EU Display Two-line display with illumination , cutout 36 x 15 mm (W x H), for displaying the ACTUAL temperature and the internal diagnostics (sensor breakage, sensor short circuit) |