|
THERMASGARD® HFTM - EtherCAT PInterconnective THERMASGARD® HFTM - EtherCAT P sleeve temperature measuring transducer with M8 plug-in connector (EtherCATP-encoded), Bluetooth-enabled, in an impact resistant plastic housing with quick-locking screws, optionally with/without display and bar graph, cable sensor with stainless steel sleeve. The sleeve sensor device serves to detect the temperature in liquid and gaseous media. It is used as a duct sensor or, if installed in a THE thermowell (accessory), as an immersion and screw-in sensor in liquids. The sensor is factory-calibrated. EtherCATP-enabled measuring transducer for industrial requirements with maximum reliability: includes easy PLC integration using the device's ESI configuration file, diagnostics (such as communication failure counter), advanced setting options, access to historical data (min/max) and establishing the sensor's service interval. Optionally with large back-lit three-line display (customised programming in the 7-segment and dot-matrix ranges) and bar graph (7-digit, LEDs freely configurable) for graphical display, e.g. as a traffic light indicator.
收藏
产品编号 2001-2162
Voltage supply 24VDC via EtherCATP (US) Power consumption < 3 W Temperature deviation typically ± 0.2 K at +25 °C Radio technology Bluetooth (LE) Sensor Pt1000, DIN EN 60751, class B (Perfect Sensor Protection at IP68) Sensor protection Sensor sleeve made from stainless steel V4A (1.4571), Ø = 6 mm, nominal length (NL) = 50 mm (optional 30...400 mm) Measuring range –50...+150 °C; Tmax to +150 °C Ambient temperature Measuring transducer –30...+70 °C Medium Clean air and non-aggressive, non-combustible gases; liquids depending on selected immersion sleeve (accessory) Bus protocol Cable connection M8 plug-in connector, EtherCATP-encoded Dimensions 126 x 90 x 50 mm (Tyr 2) sensor cable Silicone, SiHF, 2 x 0,25 mm²; cable length (KL) = 1.5m (other lengths and jacket materials, e.g. PTFE or glass fibre with steel mesh, available on request) Permissible air humidity < 95 % RH, non-precipitating air Protection class III (according to EN 60 730) Protection type IP 65 (according to EN 60 529) sleeve humidity-tight (standard) IP 68 (according to EN 60 529) sleeve water-tight (optional) IP 54 (according to EN 60 529) housing / with glass fibre cable (optional) Standards CE conformity, according to EMC Directive 2014/ 30/ EU, according to RED 2014/ 53/ EU |
