|
THERMASGARD® MWTM - EtherCAT PInterconnective THERMASGARD® MWTM - EtherCATP mean value temperature measuring transducer with M8 plug-in connector (EtherCATP-encoded), Bluetooth-enabled, in an impact resistant plastic housing with quick-locking screws, optionally with/without display and bar graph, with a bendable sensor rod (0.4...20 m, fully active) in a robust plastic-coated protective copper tube, incl. mounting flange. The rod sensor serves to detect the mean temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or on a defined length (laid along a meandering route, it uniformly detects the surrounding temperature). For proper mounting of the rod, MK-05-M mounting clamps MK-05-M are available as accessory. The sensor device is factory-calibrated. EtherCATP-enabled measuring transducer for industrial requirements with maximum reliability: includes easy PLC integration using the devices ESI configuration file, diagnostics (such as communication failure counter), advanced setting options, access to historical data (min/max) and sensor service interval determination. Optionally with large back-lit three-line display (customised programming in the 7-segment and dot-matrix ranges and bar graph (7-digit, LEDs freely configurable) for graphical display, e.g. as a traffic light indicator.
收藏
产品编号 2001-4212
Voltage supply 24VDC via EtherCATP (US) Power consumption < 3 W Temperature deviation typically ± 0.2 K at +25 °C Radio technology Bluetooth (LE) Sensor Pt1000, DIN EN 60751, class B Sensor protection copper sensor tube, plastic-coated, with spring for buckling protection Measuring range – 50...+ 150 °C; Tmin –50 °C, Tmax + 80 °C Ambient temperature Measuring transducer –30...+70 °C Medium clean air and non-aggressive, non-combustible gases Bus protocol Process connection by mounting flange, plastic (included in the scope of delivery) Probe active along the entire sensor length Cable connection M8 plug-in connector, EtherCATP-encoded Installation Bending radius > 35 mm admissible vibration load ½ g admissible tensile load < 480N Dimensions 126 x 90 x 50 mm (Tyr 2) Permissible air humidity < 95 % RH, non-precipitating air Protection class III (according to EN 60 730) Protection type IP 54 (according to EN 60 529) when built-in Standards CE conformity, according to EMC Directive 2014/ 30/ EU, according to RED 2014/ 53/ EU |
