|
|
HYGRASREG® LSThe HYGRASREG® LS leakage / water ingress detector with leakage location serves to detect ingress of water and conductive liquids. It has been designed for early water leakage detection to protect sensitive electrical and electronic equipment in buildings against humidity. The water ingress detector consists of an electronic monitoring system and a matching electrode which can be extended by the user.
Collect
Spannungsversorgung Proxy 24 V AC (± 20 %) and 15…36 V DC Voltage supply 24 V AC (± 20 %) and 15…36 V DC Monitoring range conductive liquids between the probes Switching threshold conductance between electrodes > threshold Power consumption < 1,0 W/ 24 V DC < 2,2 VA/ 24 V AC Ausgang Proxy changeover contact Output changeover contact Output signal potential-free changeover contact (24 V), 1 A ohmic load Process connection two external probes, laid according to measuring task (on the LS - 2) or upright on four electrodes with insulating plastic caps , which are mounted on the housing underside (on the LS - 4) Electrical connection 0.14 - 1.5 mm² via terminal screws Cable connection cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or M12 connector according to DIN EN 61076-2-101 (optional on request) Housing plastic, UV-stabilised, material polyamide, 30 % glass-globe reinforced, with quick-locking screws (slotted/ Phillips head - combination), colour traffic white (similar to RAL 9016), housing cover for display is transparent ! Housing dimensions 72 x 64 x 43.3 mm (Tyr 1 with Display) Cable gland M 16 x 1.5, including strain relief, exchangeable, max. inner diameter 10.4 mm Protection class III (according to EN 60 730) Protection type IP 65 (according to EN 60 529)* Standards CE conformity, electromagnetic compatibility according to EN 61326, according to EMC Directive 2014/ 30/ EU Function The leak sensor can be set using DIP switches so that the relay is energised during normal operation. This means that relay opens in the event of a fault (water damage, cable breakage, power failure). This also enables a break in the cable to the sensor to be detected. |