|
HYGRASGARD® KFTF - EtherCAT P（LCD）Interconnective HYGRASGARD® KFTF - EtherCAT P duct humidity and temperature transmitter with M8 plug-in connector (EtherCATP-encoded), Bluetooth-enabled, in an impact resistant plastic housing with quick-locking screws, optionally with/without display and bar graph, with plastic sinter filter (replaceable), incl. mounting flange. The sensor device serves to detect various parametres in humidity measurement. It measures relative humidity (0...100% RH) and ambient air temperature (–35...+80°C). These measurands are used internally to calculate further output values: absolute humidity (0...80 g/m³), mixture ratio (0...80 g/kg), dew point temperature (–20...+80°C) and enthalpy (0...85 kJ/kg) while ignoring atmospheric air pressure. A long-term stable, digital sensor guarantees precise measuring results. The sensor is factory-calibrated. EtherCATP-enabled measuring transducer for industrial requirements with maximum reliability: includes easy PLC integration using the devices ESI configuration file, diagnostics (such as communication failure counter), advanced setting options, access to historical data (min/max) and sensor service interval determination. Optionally with large back-lit three-line display (witjh customised programming in the 7-segment and dot-matrix ranges) and bar graph (7-digit, LEDs freely configurable) for graphical display, e.g. as a traffic light indicator.
收藏
产品编号 2003-4222/2003-4221
Data points Temperature [°C], relative humidity [% r. h.], dew point [°C], absolute humidity [g/ m3], mixture ratio [g/ kg], enthalpy [kJ/ kg] Deviation of humidity typical ± 2.0 % (20…80 % RH); at + 25 °C, otherwise ± 3.0 % Radio technology Bluetooth (LE) Sensor digital humidity sensor with integrated temperature sensor, low hysteresis, high long-term stability Sensor protection plastic sinter filter, Ø 16 mm, L = 35 mm, exchangeable (optional metal sinter filter, Ø 16 mm, L = 32 mm) Measuring range 0...100 % RH (humidity) – 35...+80 °C (temperature) Ambient temperature –30...+70 °C Medium annähernd neutrale, nicht aggressive Gase oder Flüssigkeiten Bus protocol Process connection by mounting flange, plastic (included in the scope of delivery) Protective tube PLEUROFORM, material polyamide (PA6), with torsion protection, Ø 20 mm, NL = 235 mm (optionally 100 mm), vmax = 30 m/s (air) (option on request in stainless steel V2A (1.4301), Ø 16mm) Cable connection M8 plug-in connector, EtherCATP-encoded Dimensions 126 x 90 x 50 mm (Tyr 2) Long-term stability ± 1 % per year Permissible air humidity < 95 % RH, non-precipitating air Protection class III (according to EN 60 730) Protection type IP 54 (according to EN 60 529)* Standards CE conformity, according to EMC Directive 2014/ 30/ EU, according to RED 2014/ 53/ EU |
