首页 >> 产品中心 >>HUMIDITY >>HUMIDITY TRANSMITTERS, HYGROMETERS >> HYGRASGARD® AFTF - EtherCAT P(LCD)
详细说明

HYGRASGARD® AFTF - EtherCAT P(LCD)

Networkable HYGRASGARD® AFTF - EtherCATP outside humidity and temperature transmitter with M8 plug-in connector (EtherCATP-encoded), Bluetooth-enabled, in an impact resistant plastic housing with quick-locking screws, optionally with/without display and bar graph, with plastic sinter filter (replaceable).

The sensor device serves to detect various parametres in humidity measurement. It measures the relative humidity (0...100% RH) and the temperature (–35...+80°C) of the ambient air. These measurands are then used internally to calculate further output values: absolute humidity (0...80 g/m³), mixture ratio (0...80 g/kg), dew point temperature (–20...+80°C) and enthalpy (0...85 kJ/kg) while ignoring atmospheric air pressure. A long-term stable, digital sensor guarantees precise measuring results. The sensor is factory-calibrated.
EtherCATP-enabled measuring transducer for industrial requirements with maximum reliability: includes easy PLC integration using the devices ESI configuration file, diagnostics (such as communication failure counter), advanced setting options, access to historical data (min/max) and sensor service interval determination. Optionally available with large back-lit three-line display (customised programming in the 7-segment and dot-matrix ranges) and bar graph (7-digit, LEDs freely configurable) for graphical display, e.g. as a traffic light indicator.


暂无价格
Display
  1. Yes
  2. No
收藏
产品编号 2003-6262
  • TECHNICAL DETAILS
  • DOWNLOADS
Data points
Temperature [°C], relative humidity [% r. h.],
dew point [°C], absolute humidity [g/ m3],
mixture ratio [g/ kg], enthalpy [kJ/ kg]
Deviation of humidity
typical ± 2.0 % (20…80 % RH); at + 25 °C, otherwise ± 3.0 %

Radio technology
Bluetooth (LE)
Sensor
digital humidity sensor
with integrated temperature sensor,
low hysteresis, high long-term stability
Sensor protection
plastic sinter filter, Ø 14 mm, L = 25 mm, exchangeable
Measuring range
0...100 % RH (humidity)
– 35...+80 °C (temperature)
Ambient temperature
–30...+70 °C
Medium
clean air and
non-aggressive, non-combustible gases
Bus protocol
Process connection
Using screw-in device on housing
Protective tube
Stainless steel V2A (1.4301), Ø 16mm
Cable connection
M8 plug-in connector, EtherCATP-encoded
Dimensions
126 x 90 x 50 mm (Tyr 2)
Long-term stability
± 1 % per year
Humidity
< 95 % RH, non-precipitating air
Protection class
III (according to EN 60 730)
Protection type
IP 54 (according to EN 60 529)*
Standards
CE conformity, according to EMC Directive 2014/ 30/ EU,
according to RED 2014/ 53/ EU


技术支持: 97建站 | 管理登录
×
seo seo