|
HYGRASGARD® AFTF-U( LCD)Calibratable HYGRASGARD® AFF outside humidity/temperature transmitter (±2,0%) with plastic sinter filter (metal sinter filter optional) or HYGRASGARD® AFF - 20/ AFTF - 20 outside humidity/temperature transmitter ( ±1,8%) with pluggable measuring head and metal sinter filter, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, with cable gland (optionally with M12 connector according to DIN EN 61076-2-101). The sensor devices measure relative humidity and/or air temperature and convert the measurand into a standard signal of 0-10 V or 4...20 mA. Both humidity/temperature transmitters support four switchable temperature ranges and are applied in non-aggressive, dust-free atmospheres in refrigeration, air conditioning, ventilation and cleanroom engineering. Relative humidity (in % r.H.) is the quotient of water vapour partial pressure divided by the saturation vapour pressure at the respective gas temperature. The measuring transducers provide precise detection of humidity. A digital long-term stable sensor is used as measuring element for humidity. The sensor is factory-calibrated and can be fine-tuned to ambient conditions by an expert.
![]()
收藏
产品编号 1201-7111
Voltage supply 24 V AC (± 20 %) and 15…36 V DC Power consumption < 1.1 VA/ 24 V DC ; < 2.2 VA/ 24 V AC Load resistance RL > 5 kOhm Protection type IP 65 (according to EN 60 529)* Measuring range, humidity 0...100 % r. H. (output corresponding to 0 -10 V) Deviation of humidity typical ± 2 % r. H. (20…80 % r. H. ); at + 25 °C, otherwise ± 3 % Output, humidity 0 - 10 V Measuring range, temperature multi-range switching –35...+35 °C; –35...+75 °C; 0...+50 °C; 0...+80 °C (output corresponding to 0 -10 V or 4 … 20 mA) Temperature deviation typically ± 0.4 K at +25 °C Output, temperature 0 - 10 V Sensor protection plastic sinter filter, Ø 16 mm, L = 35 mm, exchangeable (optional metal sinter filter, Ø 16 mm, L = 32 mm) Ambient temperature storage –35...+85 °C; operation – 30...+80 °C, non-precipitating Process connection by screws Protective tube stainless steel V2A (1.4301), Ø 16 mm, NL = 55 mm Electrical connection 2-, 3- or 4-wire connection 0.14 -1.5 mm ² via terminal screws on circuit board Cable connection cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or M12 connector according to DIN EN 61076-2-101 (optional on request) Housing plastic, UV-stabilised, material polyamide, 30 % glass-globe reinforced, with quick-locking screws (slotted/ Phillips head - combination), colour traffic white (similar to RAL 9016), housing cover for display is transparent ! Housing dimensions 126 x 90 x 50 mm (Tyr 2) Cable gland M 16 x 1.5, including strain relief, exchangeable, max. inner diameter 10.4 mm Long-term stability ± 1 % per year Permissible air humidity < 95 % RH, non-precipitating air Protection class III (according to EN 60 730) Standards CE conformity, according to EMC directive 2014/ 30/ EU, according to EN 61326-1, according to EN 61326-2-3 Optional three-line display with illumination, cutout 70 x 40 mm (W x H), for displaying ACTUAL temperature and/ or ACTUAL humidity Display three-line display with illumination, cutout 70 x 40 mm (W x H), for displaying ACTUAL temperature and/ or ACTUAL humidity |