|
RHEASREG® KLGFVT-W (LCD)Electronic RHEASGARD® KLGF duct air flow transmitter with active output, in an impact resistant plastic housing, optionally with/without display, for determining flow velocity in m/s. The measuring transducer converts the measured value into a standard signal of 0-10 V. ElectronicRHEASREG® KLSW duct air flow monitor with switching output (one-step or two-step relay), in a plastic housing, for determining flow velocity in m/s. Fine adjustment of the measuring range end value by the user is possible with the help of a potentiometer. The flow sensor devices are suitable for monitoring or controlling airflow in ducts, at ventilators and dampers, for flow-dependent monitoring of humidifiers and electric heating registers according to DIN 57100, part 420, or for use in connection with DDC systems.
Collect
产品编号 1701-4118-1401-001/1701-4118-0
Voltage supply 24 V AC/ DC (± 10 %) Start bridging 60 s (can be activated via DIP switch) Measuring accuracy 0.5 m/s + 3 % measured value Warm up time < 2 min Response time < 60 s Output automatically 0 -10 V/ 4...20 mA (via Automatic Output Switching - the device recognizes the required output type and automatically switches to U or I output) Output 0-10 V Output signal linearized Sensor Calorimetric, temperature compensated, sensor breakage protection, with manual zero-point calibration (via button) Reproducibility ± 1.0 % final value Current consumption approx. 4 VA Measuring range 0,1...20 m/s Measuring ranges Flow velocity [m/s], Volume flow [m3/h], temperature [°C] Media temperature 0...+70 °C Ambient temperature storage –20...+ 50 °C operation 0...+ 50 °C Medium pollutant-free, non-precipitating air Process connection by mounting flange (included in the scope of delivery) Protective tube PLEUROFORMTM, material polyamide (PA6), with torsion protection, Ø 20mm, NL = 221 mm, vmax = 30 m/s (air), stainless steel V2A (1.4301), Ø 16 mm available upon request as an option Electrical connection 0.2 - 1.5 mm2, via push-in terminal Cable connection cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or M12 connector according to DIN EN 61076-2-101 (optional on request) Housing plastic, UV-stabilised, material polyamide, 30 % glass-globe reinforced, with quick-locking screws (slotted/ Phillips head - combination), colour traffic white (similar to RAL 9016), housing cover for display is transparent ! Housing dimensions 126 x 90 x 50 mm (Tyr 2) Cable gland M 16 x 1.5, including strain relief, exchangeable, max. inner diameter 10.4 mm Dimensions 126 x 90 x 50 mm (Tyr 2) Long-term stability ± 0.5 % final value per year Humidity < 98% r.H. pollutant-free, non-precipitating air Protection class III (according to EN 60 730) Protection type IP 65 (according to EN 60 529)* Standards CE conformity, according to EMC directive 2014/ 30/ EU, according to EN 61326-1, according to EN 61326-2-3 Display Optional: Display with illumination, three lines, cut-out approx. 70 x 40 mm (W x H), for display of flow velocity (KLSW-W24, KLGF) Reproducibility ± 1,0 % EW |