Home >> PRODUCTS >>AIR QUALITY & FLOW >>AIR QUALITY >> AERASGARD® RCO2-AS
Product Detail

AERASGARD® RCO2-AS

Maintenance-free AERASGARD® RCO2-AS xx CO2 detector with traffic-light indicator and acoustic signal, self-calibrating, in an attractive plastic housing, for determining the CO2 content of the room air (0...3000 ppm). The measuring transducer converts the measurand to a standard signal, which is directly visualised by colour LEDs (traffic light indicator). An additional signal tone sounds when warning levels are reached (can be switched off via DIP switch).
Available as RCO2-AS NT ST table-top unit with micro-USB power cable and stainless steel stand, as RCO2-AS NT with plug-in power supply unit, as RCO2-AS UPNT with in-wall power supply unit, and as RCO2-AS wall-mount device without power supply unit. The room device with CO2 traffic light is used in class, training and meeting rooms, offices, hotels, apartments, shops, etc. for quick and easy indoor climate assessment. It enables an energy-saving on-demand room ventilation, thereby reducing operating costs and improving well-being. We recommend one sensor for every 30 m2 of space. The CO2 content is measured using an optical NDIR sensor (non-dispersive infra-red technology).


No price
Collect
  • TECHNICAL DETAILS
  • DOWNLOADS
Voltage supply
5...24 V DC
Measuring range, CO2
0...3000ppm
Measuring accuracy
typically ± 30 ppm ± 3 % of measured value
Temperature dependence, CO2
± 5 ppm/ °C or ± 0.5 % of measured value/ °C
(whichever is higher)
Pressure dependence
± 0,13 %/ mm Hg
Gas exchange
by diffusion
Warm up time
approx. 1 hour
Response time
< 2 minutes
Connection type
2-wire circuit (no reverse polarity protection!)
Ambient temperature
0...+50 °C
Housing
plastic, material ABS,
colour pure white (similar to RAL 9010)
Dimensions
85 x 85 x 27 mm (Baldur 1)
Long-term stability
< 2 % in 15 years
Protection class
III (according to EN 60 730)
Sensor
Optical NDIR sensor (non-dispersive infra-red technology),
with manual calibration (via zero button),
with automatic calibration (can be deactivated via DIP switches)
Protection type
IP 30 (according to EN 60 529)
Electrical connection
terminal screws on circuit board (0.14 - 1.5 mm2), without power supply unit
Installation
wall mounting or on in-wall flush box, Ø 55 mm,
base with 4 holes, for attachment to vertically or
horizontally installed in-wall flush boxes for rear cable entry,
with predetermined breaking point for cable entry
from top/ bottom in case of plain on-wall installation
Standards
CE conformity, electromagnetic compatibility
according to EN 61 326, EMC Directive 2014/ 30/ EU,
Low Voltage Directive 2014/ 35/ EU
Features
traffic light indicator (five coloured LEDs)
acoustic signal (signal can be switched off for displaying the CO2 concentration


  • Telephone

    • 19836508612
    • 19836508612
Technical Support: 97建站 | Admin Login
×
seo seo