|
PREMASGARD 7247-Modbus LCDMaintenance-free, microprocessor-controlled PREMASGARD® 724x - Modbus (series) with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, connection nozzles for pressure hose (Ø 6 mm), with cable gland or M12 connector according to DIN EN 61076-2-101, optionally with/without display, for measuring the differential pressure (2 measuring channels, max. ± 7000 Pa) in air. Type variant 724x T with connection facility for external Pt1000 sensor (sensor element not included in the scope of delivery) for detecting the temperature (–50...+150°C). International system of units SI (default) can be switched to Imperial (via Modbus). Incl. connection set ASD-06 (2 m connecting hose, two pressure port nipples, screws).
Collect
Voltage supply 24 V AC (± 20 %) and 15…36 V DC Power consumption < 4.8 W/ 24 V DC typical; < 6.8 VA/ 24 V AC typical Data points Temperature, differential pressure Measuring range, temperature -50°C...150°C Operating range, temperature typically ± 0.2 K at +25 °C Media temperature –20...+50 °C Pressure connection with connection nozzles for pressure hose Ø 6 mm Type of pressure differential pressure Zero point offset < ± 0.7 % of final value Above- below-pressure máx. ± 50 kPa Ambient temperature –30...+70 °C Medium clean air and non-aggressive, non-combustible gases Bus protocol Modbus (RTU mode), address range 0...247 selectable Signal filtering 0s, 1s, 10s Sensor protection plastic sinter filter, Ø 16 mm, L = 35 mm, exchangeable (optional metal sinter filter, Ø 16 mm, L = 32 mm) Electrical connection 0.2 - 1.5 mm2, via push-in terminal Housing dimensions 126 x 90 x 50 mm (Tyr 2) Cable gland 2x M 16 x 1.5; including strain relief, exchangeable Long-term stability ± 1 %/ year Sum of Linearity+hysteresis < ± 1 % of final value Temperature drift values ± 0.1 %/ °C Protection class III (according to EN 60 730) Protection type IP 65 (according to EN 60 529) housing only! (PLEUROFORM IP 30) Cable connection cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or M12 connector (male, 5-pin, A-code) according to DIN EN 61076-2-101 (optional on request) Standards CE conformity, electromagnetic compatibility according to EN 61326, according to EMC Directive 2014/ 30/ EU |