详细说明

KYMASGARD® RFTM-BW-FSE

The wireless room sensor devices of the KYMASGARD® 9000 radio bus system are maintenance-free radio transmitters that function without batteries. Power is generated by a solar cell that converts indoor room light into electric energy. If the ambient light is too low for power generation, the sensors can optionally be powered by two AAA batteries (not included).

These sensors serve to detect the indoor climate and the setpoint values, and to transmit the recorded values to radio actuators and radio signal receivers/gateways by means of radio signals. The following device configurations are available:

KYMASGARD® RFTM-FSE for measuring room temperature and room humidity.

KYMASGARD® RFTM-FSE-ST for measuring room temperature and humidity, and for displaying and setting the temperature setpoint on site using touch buttons.

KYMASGARD® RFTM-LQ-FSE for measuring room temperature, room humidity and air quality (VOC = Volatile Organic Compounds).

KYMASGARD® RFTM-BW-FSE for measuring room temperature and room humidity, and for detecting the movement (or presence) of persons.

暂无价格
收藏
产品编号 1801-4280-4000-000
  • TECHNICAL DETAILS
  • DOWNLOADS
Operating range, humidity
0...100 % RH
Deviation of humidity
typical ± 2.0 % (20…80 % RH); at + 25 °C, otherwise ± 3.0 %

Operating range, temperature
0...+40 °C
Temperature deviation
typically ± 0.2 K at +25 °C
Operation
Energy generation by solar cell,
batteryless, maintenance-free (optionally battery-operated)
Radio technology
EnOcean protocol, modulation ASK, 868 MHz,
transmission power max. 10 mW, telegram type 4BS
Channels
1 temperature, 1 humidity, 1 setpoint,
1 air quality (VOC), 1 motion/presence
Radio transmitter module
EnOcean Dolphin
Measurand acquisition
adjustable, every 1s/ 10 s/ 100 s
Range of coverage
indoors typically 30 - 100 m, outdoors up to 300 m
Ambient temperature
–5...+55 °C
Storage temperature
–25...+60 °C
Housing
plastic, material ABS,
colour pure white (similar to RAL 9010)
Dimensions
Ø 88 mm, height 18 mm
Installation
Wall-mounted or free-standing using accessories
Permissible air humidity
0…90 % r.H., non-precipitating air
Protection class
III (according to EN 60 730)
Protection type
IP 30 (according to EN 60 529)
Transmission interval
adjustable, typically every 100 seconds,
or at any measuring value change,
status telegram approximately every 16 minutes
Motion detection
yes/no (motion + presence)
Standards
CE conformity according to EMC directive 2014/ 30/ EU
and according to R&TTE directive 2014/ 53/ EU


  • 电话直呼

技术支持: 97建站 | 管理登录
×
seo seo