|
THERMASGARD® TM65-IPatented quality product (immersion sensor patent no. DE 10 2012 017 500.0) Calibratable THERMASGARD® TM 43 temperature measuring transducer with eight switchable measuring ranges, continuous linear output, straight protective tube, housing made of impact resistant plastic with snap-on cover. Calibratable THERMASGARD® TM 65 temperature measuring transducer with eight switchable measuring ranges, continuous linear output, straight protective tube, housing made of impact resistant plastic with quick-locking screws, with/without optional display. For the detection of temperatures in liquid or gaseous media. For aggressive media, stainless steel thermowells must be used. Applications are found in e.g. in piping and heating systems, in storage tanks and district heating compact stations, in hot-water and cold-water, oil and lubricant circulation systems, in mechanical, equipment and plant engineering as well as in the entire industrial sector. The sensor is factory-calibrated and can be fine-tuned to ambient conditions by an expert.
Collect
产品编号 1101-7112
Voltage supply 15...36 V DC depending on working resistance, residual ripple stabilised ± 0.3 V Power consumption < 1,0 W/ 24 V DC < 2,2 VA/ 24 V AC Working resistance Ra (ohm) = (Ub -14 V)/ 0.02 A for I variant Temperature deviation typically ± 0.2 K at +25 °C Output 4...20 mA Sensor Pt1000, DIN EN 60751, class B (Perfect Sensor Protection) Connection type 2- or 3-wire connection Measuring ranges multi-range switching with 8 switchable measuring ranges, see table (other ranges optional) with manual zero point correction (± 10 K) Ambient temperature Measuring transducer –30...+70 °C Protective tube stainless steel, 1.4571, V4A, Ø = 6 mm Electrical connection 0.14 - 1.5 mm² via terminal screws on circuit board Cable connection cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or M12 connector according to DIN EN 61076-2-101 (optional on request) Housing plastic, UV-stabilised, material polyamide, 30 % glass-globe reinforced, with quick-locking screws (slotted/ Phillips head - combination), colour traffic white (similar to RAL 9016), housing cover for display is transparent ! Housing dimensions 72 x 64 x 43.3 mm (Tyr 1 with Display) Cable gland M 16 x 1.5, including strain relief, exchangeable, max. inner diameter 10.4 mm Permissible air humidity < 95 % RH, non-precipitating air Protection class III (according to EN 60 730) Protection type IP 65 (according to EN 60 529)* Standards CE conformity, electromagnetic compatibility according to EN 61326, according to EMC Directive 2014/ 30/ EU Display Two-line display with illumination , cutout 36 x 15 mm (W x H), for displaying the ACTUAL temperature and the internal diagnostics (sensor breakage, sensor short circuit) |