|
KYMASGARD® SA400 - FEM - APRADIO RECEIVER KYMASGARD® SA400 - FEM - AP The KYMASGARD® SA400 - FEM - AP switching actuator provides four potential-free channels and has been designed for on-wall installation. Initiated by up to 30 radio transmitters (wall-mounted and hand-held transmitters, motion detectors, outdoor light sensors) and the auxiliary inputs, up to four different groups of electric consumers can be switched. Each taught-in transmitter can be assigned a different function such as a sequential pushbutton function or a 10-minute switch-off delay. The repeater function can be additionally activated by means of a simple procedure.
Collect
产品编号 1801-7454-0200-300
Operating mode switching ON/ OFF (long push of button), pulse switch, stepping switch Rated voltage 110 - 240 V, 50 / 60 Hz Operating elements 2 buttons ("LRN"/ "CLR") 2 LEDs ("LRN"/ "CLR") 1 rotary switch with 16 positions Channels 4 channels Standby consumption 0.6 W Load output Connected load normally open contact potential free rated current: 16 A/ 250 V AC max. switch-on current: 130 A/ 20 ms max. switching capacity AC1: 4000 VA max. switching capacity AC15: 750 VA filament bulbs: 2000 W halogen lamps 230 V AC: 2000 W fluorescent lamps, uncompensated: 1000 W fluorescent lamps, compensated: 750 W fluorescent lamps, duo-connection: 1000 W motor load 1Ph AC3/ 230 V AC: 1 kW electronic ballast assuming 30 F: 3 unit capacitive load : 30 F Switching properties parametrisable Ambient temperature –20...+40 °C (in operation) Storage temperature –40...+85 °C Connection 4mm², via terminal screws Housing plastic, material ABS, 170 x 85 x 40 mm Installation on-wall Permissible air humidity 5…90 % r.H., non-precipitating air Protection type IP 42 (according to EN 60 529) Standards CE conformity, EN 090-2-2, EN 60669-2-1, ROHS conformity according to directive 2011/ 65/ EU |