|
RYMASKON® 200 - ModbusROOM CONTROL UNIT FOR ROOM AUTOMATION RYMASKON® 200 - MODBUS RYMASKON® stands for a series of multifunctional room controllers. The individually configurable RYMASKON® 200 - Modbus unit enables automated monitoring and control of indoor climate and illumination in a Modbus network. It provides three digital inputs and a universal input, which allows connection of up to four external push buttons or switches. It can be configured remotely from a higher-level Modbus master and integrated into a cross-building room climate monitoring and data acquisition system. Internal sensors record room temperature, relative humidity and dew point. Up to eight capacitive function buttons on the front panel of the compact control unit can be used for on-site operation and configuration. A buzzer sounds to acknowledge button use and can also be used as an acoustic fault or alarm warning. The dimmable multifunctional display has been designed specifically for room operation and uses intuitive symbols for a clear view of all available spatial data. Beside time, date and climate parametres (temperature, humidity, dew point, CO2 content), the device can also display additional features, such as fan mode or room occupancy. The back light colour can be adapted to the room design.
Collect
产品编号 1901-5111
Voltage supply 24 V DC (± 10 %) Power consumption max. 0.8 W Measuring range, humidity 0...100 % RH, resolution: 0.1 % RH Measuring range, temperature –40...+125 °C, resolution: 0.1 °C Sensor Temperature: CMOS temperature sensorHumidity: capacitative humidity sensor Ambient temperature 0...+50 °C (operation) Electrical connection 0.14 - 1.5 mm², via plug-in screw terminal Inputs 3 digital inputs (for standard push buttons or switches) 1 universal input (can be configured for connecting NTC temperature sensors or as additional digital input for the connection of standard push buttons or switches) Dimensions approx. 94.5 x 110 x 19.5 mm Bus interface RS485 Modbus RTU slave (57600, 38400, 19200, 9600 Baud), bus termination can be set via DIP switch, configurable speed 1200-115200 bit/s (typically 57600 bit/s), adjustable transfer mode (typically "8E1", 1 start bit, 8 data bits, even parity, 1 stop bit) Installation using a plastic mounting plate, on in-wall flush box, Ø 55 mm Operating elements 1 backlit multifunctional display (individually programmable RGB colour selection) 4 / 6 / 8 touch buttons, type-dependent Permissible air humidity 10...90 % RH (without dew formation) Protection type IP 30 (according to EN 60 529) Standards CE conformity, electromagnetic compatibility according to EN 50491, EMC directive 2014/ 30/ EU Accuracy Temperature: ±0.5 °C (at +5...+60 °C)Humidity: ±2 % RH (at +25 °C, 20...80 % RH) ±3 % RH (at +25 °C, 0...20 % RH or 80...100 % RH) Features 1 NFC (Near Field Communication) 1 infra-red receiver (NEC protocol) 1 buzzer Housing plastic, white colour |