|
|
HYGRASGARD® RPFTF-20-Modbus(LCD)Quality products for the HVAC sector, accuracy ±1.8% or ±2% The measuring transducers are used in non-aggressive, dust-free environments, in refrigeration, air conditioning and cleanroom engineering, in hotels, engineering rooms, meeting and conference facilities. They provide precise detection of temperature and humidity. A digital, long-term stable sensor is used as a measuring element for humidity and temperature. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct installation or for integration in equipment.
Collect
产品编号 1201-1276
Voltage supply 24 V AC (± 20 %) and 15…36 V DC Power consumption < 1,0 W/ 24 V DC < 2,2 VA/ 24 V AC Temperature deviation typically ± 0.6 K at +25 °C Deviation of humidity typical ± 1.8 % r. H. (10…90 % r. H. ); at + 25 °C, otherwise ± 2,0 % r. H. Measuring range 0...100 % RH (humidity) – 35...+80 °C (temperature) Zero point offset ± 10 % r.H. (humidity) ± 5 °C (temperature) Ambient temperature –30...+70 °C Medium clean air and non-aggressive, non-combustible gases Bus protocol Modbus (RTU mode), address range 0...247 selectable Signal filtering 4 s / 32 s Sensor digital humidity sensor with integrated temperature sensor, low hysteresis, high long-term stability Protective tube stainless steelV2A (1.4301), Ø = 16 mm, L = 142 mm Sensor protection plastic sinter filter, Ø 16 mm, L = 35 mm, exchangeable (optional metal sinter filter, Ø 16 mm, L = 32 mm) Cable gland 2x M 12 x 1.5 (Y-adapter); with strain relief, exchangeable, max. inner diameter 6 mm Cable length CL = 2 m, other lengths optional sensor cable PVC, LiYY, 6 x 0.14 mm², KL = approx. 2 m (other lengths optional) Permissible air humidity < 95 % RH, non-precipitating air Protection class III (according to EN 60 730) Protection type IP 65 (according to EN 60 529)* Standards CE conformity according to EMC Directive 2014/ 30/ EU, according to EN 61 326 Housing plastic, UV-stabilised, material polyamide, 30 % glass-globe reinforced, with quick-locking screws (slotted/ Phillips head - combination), colour traffic white (similar to RAL 9016), housing cover for display is transparent ! Housing dimensions 72 x 64 x 43.3 mm (Tyr 1 with Display) Display two-line display with illumination, programmable, cutout approx. 36 x 15 mm (W x H), for displaying the actual humidity and actual temperature or a selectable parameter or an individually programmable display value (The Modbus interface allows the display to be individually configured in the 7-segment area and in the dot-matrix area.) |