|
KFTF-20-U VA (Q)(LCD)Calibratable HYGRASGARD® KFTF - 20-VA humidity and temperature transmitter (± 1.8%) with metal sinter filter, rugged housing in V4A stainless steel, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101. The sensor device measures relative humidity and air temperature and converts these measurand into a standard signal of 0-10 V or 4...20 mA. It supports four switchable temperature ranges and is applied in non-aggressive dust-free atmospheres in refrigeration, air conditioning, ventilation and cleanroom engineering. The measuring transducer provides precise detection of humidity. A digital long-term stable sensor is used as measuring element for humidity. The sensor is factory-calibrated and can be fine-tuned to ambient conditions by an expert.
![]()
收藏
产品编号 2003-4161/2003-4162
Power consumption < 1.1 VA/ 24 V DC Voltage supply 24 V AC (± 20 %) and 15…36 V DC Measuring range, humidity 0...100 % r. H. (output corresponding to 4...20 mA) Deviation of humidity typical ± 1.8 % r. H. (10…90 % r. H. ); at + 25 °C, otherwise ± 2,0 % r. H. Output, humidity 4...20 mA Temperature deviation typically ± 0.2 K at +25 °C Load resistance RL > 5 kOhm Output, temperature 4...20 mA Measuring range, temperature multi-range switching –35...+35 °C; –35...+75 °C; 0...+50 °C; 0...+80 °C (output corresponding to 4...20 mA) Sensor protection metal sinter filter, Ø 16 mm, L = 32 mm, exchangeable, stainless steel V4A (1.4404) Ambient temperature storage –35...+85 °C; operation – 30...+75 °C, non-precipitating Process connection by screws via the mounting fixture on the housing Protective tube stainless steel V2A (1.4301), Ø 16 mm NL = 137 mm Electrical connection 2-, 3- or 4-wire connection 0.14 -1.5 mm ² via terminal screws on circuit board Housing dimensions 143 x 97 x 61 mm (Tyr 2E) Long-term stability ± 1 % per year Permissible air humidity < 95 % RH, non-precipitating air Protection class III (according to EN 60 730) Cable connection cable fitting, stainless steel V2A (1.4305) (M 20 x 1.5; with strain relief, exchangeable, inner diameter 6 - 12 mm) Housing stainless steel V4A (1.4571), with non-distortion cover bolting, impact-resistant, high EMI shielding, corrosion, temperature, UV and weathering resistant Standards CE conformity, according to EMC directive 2014/ 30/ EU, according to EN 61326-1, according to EN 61326-2-3 Optional three-line display with illumination, cutout 70 x 40 mm (W x H), for displaying ACTUAL temperature and/ or ACTUAL humidity |