|
HYGRASGARD® KFTF-20-U (Q)(LCD)Calibratable HYGRASGARD® KFF - SD / KFTF - SD duct humidity/temperature transmitters (± 2,0%), with plastic sinter filter (metal sinter filter optional), housing made of impact resistant plastic with snap-on cover, with cable gland (or optional M12 connector according to DIN EN 61076-2-101). Calibratable HYGRASGARD® KFF / KFTF or KFF - 20 / KFTF - 20 duct humidity/temperature transmitters (±2,0% or ±1,8%, respectively) with plastic sinter filter (metal sinter filter optional), housing made of impact resistant plastic with quick-locking screws, optionally with/without display, with cable gland (or optional M12 connector according to DIN EN 61076-2-101). The sensor devices measure relative humidity and/or air temperature and convert the measurands into a standard signal of 0-10 V or 4...20 mA. They support four switchable temperature ranges and are applied in non-aggressive dust-free atmospheres in refrigeration, air conditioning, ventilation and cleanroom engineering. These measuring transducers provide precise detection of humidity. A digital long-term stable sensor is used as measuring element for humidity. The sensor is factory-calibrated and can be fine-tuned to ambient conditions by an expert.
收藏
产品编号 1201-8111/2003-4172/1201-3111/
Voltage supply 24 V AC (± 20 %) and 15…36 V DC Power consumption < 1.1 VA/ 24 V DC ; < 2.2 VA/ 24 V AC Measuring range, humidity 0...100 % r. H. (output corresponding to 0 -10 V) Deviation of humidity typical ± 1.8 % r. H. (10…90 % r. H. ); at + 25 °C, otherwise ± 2,0 % r. H. Output, humidity 0 - 10 V Measuring range, temperature multi-range switching with 4 switchable measuring ranges –35...+35 °C; –35...+75 °C; 0...+50 °C; 0...+80 °C (output corresponding to 0 -10 V or 4...20 mA) Temperature deviation typically ± 0.2 K at +25 °C Output, temperature 0 - 10 V Sensor protection plastic sinter filter, Ø 16 mm, L = 35 mm, exchangeable (optional metal sinter filter, Ø 16 mm, L = 32 mm) Ambient temperature storage –35...+85 °C; operation – 30...+75 °C, non-precipitating Process connection by mounting flange, plastic (included in the scope of delivery) Protective tube PLEUROFORM, material polyamide (PA6), with torsion protection, Ø 20 mm, NL = 235 mm (optionally 100 mm), vmax = 30 m/s (air) (option on request in stainless steel V2A (1.4301), Ø 16mm) Electrical connection 2-, 3- or 4-wire connection 0.14 -1.5 mm ² via terminal screws on circuit board Cable connection cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or M12 connector according to DIN EN 61076-2-101 (optional on request) Housing plastic, UV-stabilised, material polyamide, 30 % glass-globe reinforced, with quick-locking screws (slotted/ Phillips head - combination), colour traffic white (similar to RAL 9016), housing cover for display is transparent ! Housing dimensions 126 x 90 x 50 mm (Tyr 2) Cable gland M 16 x 1.5, including strain relief, exchangeable, max. inner diameter 10.4 mm Long-term stability ± 1 % per year Permissible air humidity < 95 % RH, non-precipitating air Protection class III (according to EN 60 730) Protection type IP 65 (according to EN 60 529) Housing tested, TÜV SÜD, Report No.713139052 (Tyr 1) Standards CE conformity, according to EMC directive 2014/ 30/ EU, according to EN 61326-1, according to EN 61326-2-3 Optional three-line display with illumination, cutout 70 x 40 mm (W x H), for displaying ACTUAL temperature and/ or ACTUAL humidity Display three-line display with illumination, cutout 70 x 40 mm (W x H), for displaying ACTUAL temperature and/ or ACTUAL humidity |
