|
|
PHOTASGARD® FSHKM-U 1KMaintenance-free light intensity sensor PHOTASGARD® FSHKM with active output, in in-wall housing, to determine the illuminance (0…1kLux). The measuring transducer converts the measured variables into a standard signal of 0 -10 V. The in-wall sensor is mounted in highquality panel switch programmes, ideally of the brands Gira, Berker, Merten, Jung, Siemens or Busch-Jaeger (using in-wall adapters) either individually or in combination with light switches, socket outlets, etc.
Collect
产品编号 1601-5121-7000-162
Voltage supply 24 V AC/ DC (± 10 %) Power consumption typically < 2.0 VA/ 24 V AC; typically < 1.0 W/ 24 V DC Measuring accuracy typically ± 10 % final value Output 0 - 10 V (linearised) Sensor Light sensor (photo diode) Measuring range 0…1 kLux (optionally other individual measuring ranges, e. g. 100 kLux) Ambient temperature storage –20...+ 50 °C operation 0...+ 50 °C Electrical connection 0.14 - 1.5 mm2, using plug terminals Housing plastic, colour pure white glossy (similar to RAL 9010) (other colours are possible on request with colour variants depending on the respective switch programme) Installation in in-wall flush box Ø 55 mm Permissible air humidity < 95 % r. H., non-precipitating air Protection class III (according to EN 60 730) Protection type IP 20 (according to EN 60 529) Standards |