|
AERASGARD® RCO2-AS NT STMaintenance-free AERASGARD® RCO2-AS xx CO2 detector with traffic-light indicator and acoustic signal, self-calibrating, in an attractive plastic housing, for determining the CO2 content of the room air (0...3000 ppm). The measuring transducer converts the measurand to a standard signal, which is directly visualised by colour LEDs (traffic light indicator). An additional signal tone sounds when warning levels are reached (can be switched off via DIP switch). Available as RCO2-AS NT ST table-top unit with micro-USB power cable and stainless steel stand, as RCO2-AS NT with plug-in power supply unit, as RCO2-AS UPNT with in-wall power supply unit, and as RCO2-AS wall-mount device without power supply unit. The room device with CO2 traffic light is used in class, training and meeting rooms, offices, hotels, apartments, shops, etc. for quick and easy indoor climate assessment. It enables an energy-saving on-demand room ventilation, thereby reducing operating costs and improving well-being. We recommend one sensor for every 30 m2 of space. The CO2 content is measured using an optical NDIR sensor (non-dispersive infra-red technology).
Collect
Voltage supply 5 V DC / 230 V AC power supply unit included in the scope of delivery) Measuring range, CO2 0...3000ppm Measuring accuracy typically ± 30 ppm ± 3 % of measured value Temperature dependence, CO2 ± 5 ppm/ °C or ± 0.5 % of measured value/ °C (whichever is higher) Pressure dependence ± 0,13 %/ mm Hg Gas exchange by diffusion Warm up time approx. 1 hour Response time < 2 minutes Connection type 2-wire circuit (no reverse polarity protection!) Ambient temperature 0...+50 °C Housing plastic, material ABS, colour pure white (similar to RAL 9010) Dimensions 85 x 85 x 27 mm (Baldur 1) Long-term stability < 2 % in 15 years Protection class III (according to EN 60 730) Sensor Optical NDIR sensor (non-dispersive infra-red technology), with manual calibration (via zero button), with automatic calibration (can be deactivated via DIP switches) Protection type IP 30 (according to EN 60 529) Electrical connection Micro-USB socket on circuit board, Micro-USB power supply (micro-USB/Euro plug) Installation immediately usable free-standing device with wall power supply (plug-and-play) Standards CE conformity, electromagnetic compatibility according to EN 61 326, EMC Directive 2014/ 30/ EU, Low Voltage Directive 2014/ 35/ EU Features traffic light indicator (five coloured LEDs) acoustic signal (signal can be switched off for displaying the CO2 concentration Plug-in power supply unit (CL = approx. 1.5 m) Stand holder made from stainless steel |
